Ozone Generator: Model K1 (single cell)

Description

• New  Variable rate output and external on/off control
• Non corrosive stainless steel case
• Water trap air ventilation
  Reduces possibility of damage from water spray
• Built-in safety devices:
  – Door interlink removes power when door is opened to prevent shock injury from high voltage Flow switch shuts off unit if gas flow is interrupted
  -Integrated power filter, surge suppressor
  -U.L listed materials for non flammability
• Built for continuous duty operation
• Air cooled
• Integrated Flow Meter
• Brass oxygen/air inlet and Stainless Steel ozone outlet barb fittings
• LED indicator lights Green for normal operation, Red for system fault (overtemp, no flow, case open or power fault)

K1 Ozone Generator datasheet (PDF)

Resources

• Box diagram (PDF)
• Manual (PDF)

Specifications

• Dimensions
  (H 21” x W 9.5” x D 8”)
  Mounting holes 8” across x 19 1/8” top to bottom
  Shipping weight 26 lbs
• Corona Discharge Ozone Generation
• 10.9 gm/hr with oxygen (98% O2 @ 6 Lpm)
• Ozone output purity 4.6% by weight
• Operating pressure from -2 to 15 psi
• 110-120 vac 60 hz. U.S. or 220-230 vac 50 hz European units
  Current draw 1.6 amps RMS (187 watts) feed from 5 amp breaker
  Incoming line filter, surge suppressor carries UL, CSE, ETL certifications
  Peak surge suppression 720VAC
• Temperature from 33 to 90 degrees Fahrenheit
• Cord length 6’
• Case material 304 Stainless Steel
• I/O 1/4″ barb fittings for 3/8 OD x 1/4″ ID ozone resistant tubing.

Options